User Tools

Site Tools


vicmarcjaws

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
vicmarcjaws [2025/02/10 23:29] – created ronvicmarcjaws [2025/04/13 16:16] (current) – removed ron
Line 1: Line 1:
-== Vicmarc Jaw Ranges (on a VM120 chuck) == 
  
-^ Type ^ Name ^ ID-min ^ ID-max ^ OD-min ^ OD-max ^ 
-| Shark | 55mm | 35 | 78 | 55 | 102 | 
-| Shark | 68mm | 48 | 90 | 68 | 115 | 
-| Shark | 83mm | 65 | 93 | 83 | 116 | 
-| Shark | 105mm | 87 | ? | 105 | ? | 
-| Shark | 130mm | 110 | ? | 130 | ? | 
-| Dovetail | standard | 48 | 90 | 68 | 116 | 
-| Dovetail | 85mm | 63.5 | ? | 85 | ? | 
-| Dovetail | 105mm | 84 | 123 | 105 | 152 | 
-| Dovetail | 128mm | 106 | ? | 128 | ? | 
-| Dovetail | 148mm | 126 | 165 | 148 | 196 | 
-| Dovetail | 173mm | 150 | ? | 173 | ? | 
-| Dovetail | 198mm | 175 | ? | 198 | ? | 
-| Dovetail | 223mm | 199 | 237 | 223 | 272 | 
-| Pin | 25mm | ? | ? | 25 | ? | 
-| Pin | 35mm | 6 | 37 | 35 | 64 | 
-| Step |  | 111 | 149 | 127 | 175 | 
-| Step |  | 97 | 136 | - | - | 
-| Step |  | 70 | 110 | - | - |  
-| Step |  | 50 | 92  | - | - | 
-| Long-nose |  | 30  | ? | 47 | ? | 
-=== Notes === 
-  * - = not-applicable (mostly for step which only has 1 outside diameter range but 4 inside diameter ranges) 
-  * ? = don't have the chuck so measurements given are from Vicmarc's site 
-  * all measurements in millimeters 
vicmarcjaws.1739230196.txt.gz · Last modified: 2025/02/10 23:29 by ron

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki