Differences

This shows you the differences between two versions of the page.

--- vicmarcjaws [2025/02/10 23:33] – ron
+++ vicmarcjaws [2025/04/13 16:16] (current) – removed ron
@@ Line 1: / Line 1: @@
-== Vicmarc Jaw Ranges (on a VM120 chuck) ==
-^ Type      ^ Name     ^ ID-min ^ ID-max ^ OD-min ^ OD-max ^
-| Dovetail  | standard | 48 | 90 | 68 | 116 |
-| Dovetail  | 85mm     | 63.5 | ? | 85 | ? |
-| Dovetail  | 105mm    |  84 | 123 | 105 | 152 |
-| Dovetail  | 128mm    | 106 | ? | 128 | ? |
-| Dovetail  | 148mm    | 126 | 165 | 148 | 196 |
-| Dovetail  | 173mm    | 150 | ? | 173 | ? |
-| Dovetail  | 198mm    | 175 | ? | 198 | ? |
-| Dovetail  | 223mm    | 199 | 237 | 223 | 272 |
-| Long-nose |          |  30 | ? | 47 | ? |
-| Pin       | 25mm     |   ? | ? | 25 | ? |
-| Pin       | 35mm     |   6 | 37 | 35 | 64 |
-| Shark     | 55mm     |  35 | 78 | 55 | 102 |
-| Shark     | 68mm     |  48 | 90 | 68 | 115 |
-| Shark     | 83mm     |  65 | 93 | 83 | 116 |
-| Shark     | 105mm    |  87 | ? | 105 | ? |
-| Shark     | 130mm    | 110 | ? | 130 | ? |
-| Step      |          | 111 | 149 | 127 | 175 |
-| Step      |          |  97 | 136 | - | - |
-| Step      |          |  70 | 110 | - | - |
-| Step      |          |  50 | 92  | - | - |
-=== Notes ===
-  * - = not-applicable (mostly for step which only has 1 outside diameter range but 4 inside diameter ranges)
-  * ? = don't have the chuck so measurements given are from Vicmarc's site
-  * all measurements in millimeters
-  * where measurements didn't match Vicmarc posted sizes Vicmarc's measurements were used (typically 2mm bigger)