Differences

This shows you the differences between two versions of the page.

--- woodworking [2024/12/21 18:32] – ron
+++ woodworking [2025/06/24 23:48] (current) – ron
@@ Line 1: / Line 1: @@
 i've been woodworking since i was maybe 5 years old (off and on of course) and almost constantly (when time allows) since 17 or 18 years old.  recently (7 years ago or so) i also started woodTURNING but there's a lot of overlap between those two (besides just the "wood" part) so hopefully i can put together some good advice here as time allows.
-==== Wire Diameter to Gauge ====
+[[woodworking:woodturning]]
-[[https://en.wikipedia.org/wiki/American_wire_gauge|Source]]
-^ AWG        ^ Din    ^ Dmm    ^ Amp-max ^
-| 0000 (4/0) | 0.4600 | 11.684 | |
-| 000 (3/0)  | 0.4096 | 10.405 | |
-| 00 (2/0)   | 0.3648 | 9.266  | |
-| 0 (1/0)    | 0.3249 | 8.251  | |
-| 1  | 0.2893  | 7.348  | |
-| 2  | 0.2576  | 6.544  | |
-| 3  | 0.2294  | 5.827  |  100 |
-| 4  | 0.2043  | 5.189  | |
-| 5  | 0.1819  | 4.621  | |
-| 6  | 0.1620  | 4.115  |  65 |
-| 7  | 0.1443  | 3.665  | |
-| 8  | 0.1285  | 3.264  |  50 |
-| 9  | 0.1144  | 2.906  | |
-| 10 | 0.1019  | 2.588  |  30 |
-| 11 | 0.0907  | 2.305  | |
-| 12 | 0.0808  | 2.053  |  20 |
-| 13 | 0.0720  | 1.828  | |
-| 14 | 0.0641  | 1.628  |  15 |
-| 15 | 0.0571  | 1.450  | |
-| 16 | 0.0508  | 1.291  | |
-| 17 | 0.0453  | 1.150  | |
-| 18 | 0.0403  | 1.024  | |
-| 19 | 0.0359  | 0.912  | |
-| 20 | 0.0320  | 0.812  | |
-| 21 | 0.0285  | 0.723  | |
-| 22 | 0.0253  | 0.644  | |
-| 23 | 0.0226  | 0.573  | |
-| 24 | 0.0201  | 0.511  | |
-| 25 | 0.0179  | 0.455  | |
-| 26 | 0.0159  | 0.405  | |
-| 27 | 0.0142  | 0.361  | |
-| 28 | 0.0126  | 0.321  | |
-| 29 | 0.0113  | 0.286  | |
-| 30 | 0.0100  | 0.255  | |
-| 31 | 0.00893 | 0.227  | |
-| 32 | 0.00795 | 0.202  | |
-| 33 | 0.00708 | 0.180  | |
-| 34 | 0.00630 | 0.160  | |
-| 35 | 0.00561 | 0.143  | |
-| 36 | 0.00500 | 0.127  | |
-| 37 | 0.00445 | 0.113  | |
-| 38 | 0.00397 | 0.101  | |
-| 39 | 0.00353 | 0.0897 | |
-| 40 | 0.00314 | 0.0799 | |